Stegu Decorative Stones
Installation

The wall surface should be clean, workable and even. Clean off any production residues (cement dust) from the back of the stone tiles. Apply a suitable adhesive in dabs or with a toothed trowel onto the back of the tiles and press firmly onto the wall.

Be sure to take tiles from several boxes during installation to ensure a uniform colour-play.

After a drying period of 24-hours dry phase pointing can be carried out using a suitable pointing mortar and trowel. Do not smear the joints with pointing mortar. Finish off if necessary with a hand-brush to remove any surface residue.

According to each individual situation, if required, the completed façade can be sealed with a retro-active impregnating sealant.