Celina + Stegu
Accessories

P o i n t i n g   m o r t a r

Properties:
Professional grout for joining clinker, facade tiles and all indoor and outdoor facing; it ensures durable filling resistant to water and frost; it does not stain joined surfaces and limits to minimum blooming at the joint and tiles.
Colours: FM-weiss = white • FM-grau = grey

Consumption:
approx. 1,5-4,6 kg each m² 		Application:


Download  

Properties:
„RUSTICAL joint for facing tiles” from STEGU is designed for pointing facing tiles imitating stone, sandstone as well as for a natural stone and some kinds of clinker. It is characterised by plasticity, increased adhesion to the surface and resistance to weather conditions (frostproof and water-resistant).
Colours: FM1 = white • FM2 = creme • FM3 = grey

Consumption:
approx. 2-5 kg each m² 		Application:


Download  

A d h e s i v e

Properties:
The Adhesive MULTIELASTIK is suitable for gluing wall and floor tiles (glazed and terracotta) for interior and exterior use.

Consumption:
approx. 1,5-4,9 kg each m² 		Application:


Download  

Properties:
ELASTIK is a mortar ready for use, it is high elasticity, welding and it is applied for gluing all the outer and inner facings.

Consumption:
approx. 1,7 kg each m² 		Application:


Download  

Properties:
GIPSOLEP is the glue intended for cementing gypsum tiles and other facings in closed spaces. It is characterised by very good adhesion and creates a firm joint. It is especially recommended for gluing the gypsum tiles STEGU.

Consumption:
approx. 1-2 kg each m² 		Application:


Download  

I m p r e g n a t i o n

Properties:
Stone care is a milk-white, water-soluble silicon emulsion with a little admixture of solvent designed for surface hydrophobisation of building materials such as: porous STEGU® concrete tiles, STEGU® concrete window sills and roofs, gypsum blocks, cellular concrete, roof tiles, cement-lime plasters and, in certain cases, acrylic plasters.

Consumption:
approx. 2-6 m² each 1Liter 		Application:


Download  

Properties:
Celina Facade Protection is a breath-active, non-visible, water-based hydrophobe coating for the additional impregnation of facades build up with Celina-Klinker bricks, brickslips or Stegu decorative stonetiles based on concret.

Consumption:
approx. 250-350 ml each m² 		Application:


Download